Model 340 Tying System
The Model 340 Tying System from LPWTS represents solid state technology in wire-tying equipment. The 340 Wire Tier has 20 years of proven dependability.
The Model 340 uses the widest range of wire gauges (10-13 ga.) of any tyer on the market.
Features:
- Adaptable to 2-ram balers
- Assembled on EZ mount frame for ease of application (with debris guards)
- Tilt-back head for ease of field maintenance
- 360° wire feed provides total layout flexibility
- Track system made of top-quality, heat treated steel, which helps prevent rust and keeps track clean
- Triple-grooved pinch wheels for extended wear life
- 8-sided wire-cutter insert for extended use
- Proximity switches to reduce wear and increase reliability
- ANSI B-11 compliant safety interlocks
- High-efficiency 4-twist knot produces the highest knot strength in the industry
- Uses the widest range of galvanized wire (10-13 ga) of any tier on the market
- Designed to employ Super Hi-Ten and Premium galvanized wire
- Speeds- Typical cycle time is approximately 5 seconds, potentially producting up to 720 straps per hour
-
Wire Feed and Tension Rate:14 ft/sec (4.27 m/sec) standard
-
Wire Gauge:10-13 ga
-
Tensile Range:145,000- 190,000 psi
-
Twist and Knot Eject:1.5 sec
-
Knot:4 Twists
-
Wire Diameter:.091- .135 in (2.32- 3.43 mm)
-
Wire Application Cycle:Typically 4.6 - 5.2 sec. Overall cycle time is contingent on product size and baler opening
-
Controls:Solid State Programmable Logic Controller. NEMA 12 standard, NEMA 4 available
-
Control Voltage:120 VAC, 50 or 60 Hz/10 amps
-
Control Voltage:102 VAC or 24 VDC handshake signals to auxiliary equipment
-
Hydraulics Volume:12 gal/min (45 L/min)
-
Hydraulics Pressure:1700 psi (1.19 kg/mm2)
-
Hydraulics Temperature:110-130F (43-54C)
-
Shipping Weight:Approximately 1350 lbs.
 |
10398 - Track Nut
|
 |
10639 - Track Pin
|
 |
13251 - DC Proximity Switch
Note: Most proximity switches used are DC. However, if your Tyer uses an Allen Bradly SLC 150, the counter uses a DC switch and the rest use an AC switch. |
|
|
13252 - AC Proximity Switch
Note: Most proximity switches used are DC. However, if your Tyer uses an Allen Bradly SLC 150, the counter uses a DC switch and the rest use an AC switch. |
 |
13301 - Gripper Lever Spring
|
 |
51499 - Accumulator Wheel
|
|
|
52401 - Track Spring
|
 |
56582 - Wire Guide (Cutter Side) (11 GA)
|
 |
56628 - Twister Pinion (11 GA)
|
 |
56639 - Twister Pinion Bushing (Cutter Side) (11-13 GA)
|
|
|
56647 - Twister Pinion Bushing (Gripper Side) (11-13 GA)
|
|
|
56649 - Twister Pinion (12 GA)
|
 |
56663 - Gripper Side Yoke (11 GA)
|
|
|
56664 - Gripper Side Yoke (12 GA)
|
|
|
56665 - Gripper Side Yoke (13 GA)
|
|
|
56670 - Twister Pinion (13 GA)
|
|
|
56767 - Wire Guide (Gripper Side) (11 GA)
|
 |
56832 - Gripper Lever (11-13 GA)
|
 |
56926 - Pinch Roll (11 GA)
|
|
|
56927 - Pinch Roll (12 GA)
|
|
|
56928 - Pinch Roll (13 GA)
|
 |
57217 - Cutter Lever Insert
|
 |
57233 - Fixed Gripper (11 GA)
|
|
|
57234 - Fixed Gripper (12 GA)
|
|
|
57237 - Fixed Gripper (13 GA)
|
 |
57730 - Feed Tube
|
 |
57817 - Cutter Side Yoke Insert
|
 |
57863 - Cutter Side Yoke (11 GA)
|
|
|
57864 - Cutter Side Yoke (12 GA)
|
|
|
57865 - Cutter Side Yoke (13 GA)
|
|
|
57988 - Wire Guide (Cutter Side) (12-13 GA)
|
|
|
57989 - Wire Guide (Gripper Side) (12-13 GA)
|
|
|
65099 - Track Bolt
|
 |
65771 - Wire Separator
Note: Listed in older manuals as #35771.
|
